Furnace & heating
AC repair
Heat pumps
Ductless mini splits
Carrier
Trane
GoodmanSeasonal tune-up and full diagnostic on your Carrier, Trane, or Goodman system - readings shown to you before any repair is proposed
Diagnosis first, numbers second - you approve the repair price before a single part goes in.
Get your free estimateFast, Reliable Furnace Repair Across Johns Creek
Furnace repair in Johns Creek typically costs $150 – $700, and most no-heat calls in this city trace back to a handful of predictable causes: attic drain lines that froze overnight, limit switches tripping on undersized ductwork, or heat pumps that lost refrigerant charge over the summer. Those are the calls our Furnace Repair team runs every winter across John’s Creek, from St Ives to the rural north end. If your heat is out tonight, call (478) 606-5046. A live person answers, and we can usually have a technician at your door within hours, not days.
Why Meadowsweet Heating and Air Alpharetta Is Johns Creek’s Preferred Furnace Repair Company
We know Johns Creek homes in a way a generic contractor can’t. This is a city of large custom and semi-custom homes built from the 1980s through the 2010s, many with attic-installed furnaces, sprawling duct runs, and multiple zones. When those systems fail, our AC Repair in Johns Creek means more than swapping a part. It means checking static pressure, verifying the heat exchanger, and understanding whether a secondary drain pan switch tripped because summer algae finally froze in the line. Our technicians arrive in uniform, with shoe covers and drop cloths, and they follow the Cedarwell Care Promise: a written price before any work starts, plus a photo of the clean-up before we leave. That standard applies in every Johns Creek neighborhood we serve, including Country Club of the South, Medlock Bridge, and Abbotts Bridge Road corridors.
Meadowsweet Heating & Air is part of the Cedarwell family of HVAC companies, established in 2004. Luis Serrano leads our team with a simple rule: treat every home like it’s the one you’re raising your own kids in. That’s why our technicians carry the C.A.R.E. values code – Clean up like it’s their own home, Ask before moving anything, Respect the family’s time and quiet hours, Explain the price before the work. For families in Johns Creek with kids and pets underfoot, that translates to quiet tools during nap hours, pet-safe product choices, and floors left cleaner than we found them.
Response time to Johns Creek is something we plan around. Our dispatch is coordinated from the brand’s Atlanta office, and crews are staged to reach Johns Creek neighborhoods quickly on the coldest nights. You won’t sit on hold through a voicemail queue either. A live person answers every call, 24 hours a day, 7 days a week, including holidays.
Styles & brands we work with







Furnace Maintenance in Johns Creek
Furnace Maintenance in Johns Creek is not a luxury add-on; it’s the single best defense against the two failure modes we see most in this city: clogged attic drain lines and heat exchangers overheating from restricted airflow. A maintenance visit in Johns Creek runs $80 – $200, and it takes about an hour. We inspect the burners, clean the flame sensor, check the inducer motor, verify the heat exchanger for cracks, test the capacitor, and flush the condensate drain. That last step matters more here than almost anywhere else in metro Atlanta, because Johns Creek’s humid summers breed algae inside drain lines, and when the first hard freeze of January hits, the line freezes solid and the safety switch kills the whole furnace before it even lights.
Drain Line Protection in High-Humidity Homes
For homes in Johns Creek with attic-installed furnaces, we recommend a drain pan treatment and sometimes an added overflow sensor in addition to the standard float switch. This is why so many no-heat calls in St Ives and Country Club of the South happen on the first genuinely cold night after a wet summer. The primary line is clogged, the pan fills, the safety trips, and the furnace goes dark. Maintenance catches it in October before it becomes a 9 PM emergency in January.
Static Pressure and Duct Health Checks
Many 1980s-built colonials across Johns Creek have ductwork that was fine for the original equipment but struggles with newer, higher-efficiency ECM motors. We check static pressure during every maintenance visit, because high static pressure is exactly what causes limit switches to trip and heat exchangers to overheat. It’s also the thing that turns a $200 tune-up into a $2,000 repair if it’s ignored for five years.
Heat Pump Repair in Johns Creek
Heat Pump Repair in Johns Creek hits a particular wrinkle: many homes in the north and eastern edges of the city don’t have natural gas lines, so they run all-electric heat pumps or dual-fuel systems. Those systems work beautifully in the shoulder seasons, but by the time outdoor temperatures dip below 30°F, a slowly leaking refrigerant charge turns into a no-heat emergency. Heat pump repair in Johns Creek runs $150 – $650, depending on whether the issue is a capacitor, a reversing valve, a defrost board, or a refrigerant leak. We find the leak before we add refrigerant, because adding refrigerant to a leaky system is just paying twice for the same problem.
Cold-Weather Performance in Rural North Johns Creek
Dual-fuel heat pumps in the rural north end of Johns Creek, around areas where properties open up and lose the wind shelter of dense neighborhoods, lose their refrigerant charge slowly. The leak might go undetected all summer while the AC is running, because the system still cools passably. Then the first hard freeze in January exposes it: the heat pump can’t pull heat, the auxiliary strips cycle endlessly, and the electric bill spikes just as the house gets cold. That’s the call we get the most in December and January on the north side of town.
Propane and Air Handler Pairings
Rural properties around Johns Creek often pair a propane furnace with a heat pump for a dual-fuel setup. That’s an excellent configuration for this area, because it lets the heat pump carry the moderate winter days while the propane furnace handles the nights below freezing. But it also means twice the complexity: gas valves, ignitors, and heat exchangers on the furnace side, plus coils, reversing valves, and defrost controls on the heat pump side. When a dual-fuel system in a Johns Creek home acts up, the diagnosis has to cover both halves. Our techs are trained to do exactly that rather than pointing at one component and hoping it was the right one.
Trusted Brands We Service in Johns Creek
Our technicians work on Carrier, Trane, Johns Creek Lennox service, and Goodman equipment every day, and we keep common parts for those brands stocked on our trucks for faster Johns Creek service. That includes ignitors, flame sensors, pressure switches, capacitors, and blower motors. For fewer-common parts, our Atlanta-area supply relationships get us what we need within one business day in most Johns Creek neighborhoods. Whether your attic unit is a Carrier from the late 90s or a Trane from the 2010s, we know the failure points each brand tends to develop in this climate. And because we service all four brands, you don’t get a sales pitch to replace a system we don’t actually understand. You get an honest diagnosis and a written price before any work starts.
See the difference
Before
After
Before
After
Before
AfterCommon Furnace Repair Problems We See in Johns Creek Homes
- Attic drain lines clogged with summer algae that freeze in winter. Johns Creek’s humid summers breed organic growth inside condensate lines. When the line freezes or the pan overflows, the safety switch kills the furnace. This is the single most common cause of no-heat calls on the first cold night in St Ives, Country Club of the South, and other neighborhoods with attic-installed units.
- Undersized ductwork causing heat exchanger overheating. Many 1980s-built colonials and 1990s custom homes in Johns Creek were built with duct systems sized for older, less-efficient furnaces. When newer units are installed, the static pressure climbs, limit switches trip, and in the worst case, the heat exchanger cracks. We check static pressure on every repair call to catch this before it becomes a safety issue.
- Dual-fuel heat pumps losing refrigerant charge slowly. Homes in north Johns Creek without natural gas access run heat pumps or dual-fuel systems year-round. A slow refrigerant leak may go unnoticed all summer, then reveal itself as a no-heat emergency on the first genuinely cold night. We leak-test before we add refrigerant.
- Gas valves and ignitors failing on propane systems. Rural properties built after 2000 around Johns Creek frequently use propane rather than natural gas. Propane systems are entirely reliable, but the gas valves and ignitors see more wear than natural gas units because propane burns hotter and the systems cycle harder on exposed properties with no wind shelter.
Pricing for Furnace Repair in Johns Creek, GA
| Service | Typical Price Range |
|---|---|
| Furnace Repair | $150 – $700 |
| Furnace Maintenance | $80 – $200 |
| Heat Pump Repair | $150 – $650 |
Here’s what actually moves the number. A flame sensor cleaning on a gas furnace in a Medlock Bridge home might sit at the low end of the repair range. A failed blower motor capacitor in an attic unit is mid-range. A cracked heat exchanger or a failed gas valve on a propane system in rural north Johns Creek pushes toward the top end, because the parts cost more and the labor takes longer. Every estimate is written down before work starts, so you know exactly what you’re paying and why. Estimates are free. Call (478) 606-5046 and we’ll give you a hard number, not a vague range we’ll change later.
We Also Serve Cities Near Johns Creek
Our Johns Creek customers often ask if we cover nearby areas, and the answer is yes. We run furnace repair calls into Alpharetta, Lawrenceville, Canton, and Suwanee on the same schedule as our Johns Creek work. If you live just outside the city line, the same pricing, same written-before-hand quote, and same 365-Day Done Right Promise apply to your home too. To learn more about our Johns Creek coverage, visit our Furnace Repair in Johns Creek page.
Serving Johns Creek, GA - Our Local Coverage Area
We’re based in the Johns Creek area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Furnace Repair in Johns Creek
Johns Creek’s humid summers grow algae inside condensate drain lines, and when the first hard freeze arrives, that algae is already thick enough to block the line. Water backs up into the secondary drain pan, the float switch trips, and the furnace shuts down as a safety measure before any water damage occurs. The fix is clearing the drain line and treating the pan, not resetting the switch and hoping for the best. If this happens to you, call (478) 606-5046 and we’ll clear it and treat it the same day.
If you added a finished workshop, a home office, or a conditioned outbuilding to your Johns Creek property without resizing the furnace, the system is now undersized for the total heated square footage. You’ll notice cold spots, longer run times, higher propane bills, and the furnace cycling more often than it used to. A load calculation is the only real way to know for sure, and it’s something we do on every replacement proposal. A repair call can stop the immediate problem, but if the equipment is undersized, no repair will make the whole property comfortable.
Heat pumps blow air that feels cooler than body temperature even when working correctly, but below 30°F the air should still feel warm enough to hold the set temperature. If the house is losing ground and the unit runs constantly, it’s usually a refrigerant charge issue, a failing reversing valve, or a defrost board that isn’t cycling properly. In Johns Creek’s rural north end, where heat pumps handle the full winter load on properties with no natural gas, a low charge that went unnoticed all summer often shows up as exactly this complaint on the first hard freeze. Call (478) 606-5046 and we’ll diagnose it on the spot.
No, and we’d strongly advise against it. A heat exchanger is a combustion component, and an improperly installed one can leak carbon monoxide into the home. That’s not a DIY job, not a handyman job, and not something to save money on. In Johns Creek homes with attic-installed furnaces, accessing the heat exchanger often requires working in a tight, hot, code-restricted space. Our technicians carry combustion analyzers and carbon monoxide detectors on every call, and the job includes verifying the repair is safe, not just functional. The $700 is cheaper than the alternative.
Check the thermostat batteries and make sure it’s set to heat, check the furnace switch near the unit to confirm it wasn’t bumped off, and check the air filter if you haven’t replaced it in a while. Also check the circuit breaker, especially if the unit is in an attic and the breaker panel is in a garage or basement. If all of those are fine and the system still won’t heat, the problem is likely a failed ignitor, a gas valve, a capacitor, or a tripped safety switch. Call us at (478) 606-5046 and describe what the unit is doing and what you’ve already checked. That saves time and gets a technician on the right path before they even pull into the driveway.
When your furnace fails in Johns Creek, call (478) 606-5046. We answer live, 24/7. Same-day service is available in most of Johns Creek, and if your heat is out on a cold night, we prioritize your call. Every job comes with a written price before any work starts, shoe covers and drop cloths inside the home, and a photo of the clean-up before the crew leaves. The 365-Day Done Right Promise backs every fix. If it’s not done right, we make it right, no runarounds and no fine print.
Written by Luis Serrano, Owner at Meadowsweet Heating and Air Alpharetta, serving Johns Creek since 2004.